The first step for every applicant should be to find out what items will be required for the project. Most information can be found below. Certain permits can be obtained online to save time.
When is a Building Permit Required?
A building permit must be obtained before you erect, construct, enlarge, alter, move, repair, improve, convert, or demolish any building or structure, including decks over 30 inches high, patio covers, sheds over 120 square feet, fences over 6 feet high, and retaining walls more than 4 feet in height measured from the bottom of the footing to the top of the wall.
How Do I Apply For a Building Permit?
Application and plans should be submitted to the Planning Division, along with applicable fees, for review of land use and development requirements before submission to the Building Division. Information regarding the land use and development requirements of your site may be obtained from the Planning Division. The Planning Division can be reached at 408-615-2450 or by email. In order to assist Planning staff in locating your site, please provide the Assessor's parcel number, maps or plot plans showing the exact site location, property address and name of the nearest cross street.
All building permit applications require the completion of an application form and submission of required information. If you are applying for your permit in person, your applications and plans, together with the plan check fees and Planning Division approved plans and/or notifications, should be submitted to the Permit Center for plan check. If you are applying for your permit through the Online Permit System, please follow the instructions as indicated.
Depending on the type of work proposed, you may be required to submit construction plans. A list of plan requirements for different types of work is as follows:
- Single Family Residential Building Permits
- Non-Residential and Multi-Family Building Projects
- Plan Requirements for Non-Residential & Multi-Family Buildings
The Building Division, as well as other departments such as Planning, Fire, Utilities and Engineering, will perform a mandatory code compliance plan check for all submitted plans.
Depending on the type and complexity of the project, the City may:
- Approve the permit over the counter
- Identify additional information needed to continue the process
- Route plans for review. When plans are approved, the applicant will be notified the permit is ready to be issued.
Upon the approval of the plans by all departments, and obtaining any necessary site clearance approval from the Engineering Department, a building permit can be issued.
When May I Pick Up My Building Permit?
Processing your building permit application varies depending on the seasonal work load and the complexity of your project. Normal processing takes two to four weeks. The plans will be checked for compliance with the California and local codes, Zoning Ordinance, and the Health Codes, etc. Any remaining fees, including the building permit fee, are payable prior to issuance of the building permit. Be advised that for residential additions of 500 square feet or more, and most commercial additions, a development fee is payable to the local school district. If needed, plumbing, electrical, and mechanical permits can be issued with the building permit.
The City enforces the California codes and has adopted and amended the following codes:
For permit applications received on or after January 1, 2020
Please refer to Ordinance 1960 for City's adoption of Codes listed below:
- 2019 California Building Code
- 2019 California Residential Code
- 2019 California Electrical Code
- 2019 California Mechanical Code
- 2019 California Plumbing Code
- 2019 California Energy Code
- 2019 California Historical Building Code
- 2019 California Existing Building Code
- 2019 California Green Building Standards Code
Please also refer to the following adopted Codes and City's amendments:
- 1997 Uniform Administrative Code
- 1997 Uniform Housing Code
- 1997 Uniform Code for the Abatement of Dangerous Buildings